15
(latest NCVER data)On moulder/planers producing dressed all round and skip-dressed boards, cutters are often sharpened while still mounted in the head; FWPCOT3278 Sharpen cutters in head using a straight knife grinder develops the grinder set-up and in-head sharpening skills that keep every cutter concentric and balanced. Pairing it with moulder operation units makes sense for RTOs building timber machining scope, and FWPCOT3278 learning materials explain each set-up step.
Learners develop skills in cleaning and checking cutter heads, positioning cutters, fitting and dressing grinding wheels, locking heads to the arbor, setting tool rests, wheel advance and traversing stops, grinding to a constant straight line and draining and storing heads.
Start with our FWPCOT3278 RTO training materials rather than developing in-head grinding resources internally. Purchase RTO materials and give trainers FWPCOT3278 training materials that cover each stage from cleaning to storage.
These FWPCOT3278 RTO training materials provide a prepared foundation for sharpening cutters in head with a straight knife grinder. Purchase RTO materials to save development effort, with FWPCOT3278 training resources organised for workshop delivery.
Check the latest unit requirements on training.gov.au before delivery. Your team should contextualise and validate these FWPCOT3278 training materials for its learner cohort, delivery model and selected compliance environment. Use the supplied mapping as a starting point when reviewing your FWPCOT3278 materials against the Standards for RTOs.
FWPCOT3278 Sharpen cutters in head using a straight knife grinder focuses on sharpening cutters while mounted in the head using a straight knife grinder. It applies to individuals who maintain cutter heads for moulder/planers producing dressed all round boards with square or pencil round edges and skip-dressed boards.
The unit addresses five core areas:
This unit focuses on sharpening cutters while they remain in the head, including locking the head to the arbor and checking concentricity and weight across all cutters.
The content covers burning, incorrect grinding angles, incorrect cutter set-up and edge defects such as chipping and grinding marks, along with the effects of incorrect coolant flow and traversing settings.
Yes. The editable files let you add your grinder model, coolant procedures and cutter head storage requirements.
Yes. Lifetime updates are available under the applicable product terms, so qualifying publisher-issued updates can be accessed without buying the same product again.
They are developed as compliant learning resources with training package requirements in mind, but they do not guarantee compliance or audit outcomes. Request a free sample to review them before purchase.
By submitting this form, you agree to the TotalVET Training Resources Privacy Policy.
