LinkedIn Insight Tag

MEM12019 Measure components using coordinate measuring machines RTO Training Resources

ON SALE
Current
Current
Coming Soon
Coming Soon
Total student enrolments:

185

(latest NCVER data)

MEM12019 Measure components using coordinate measuring machines prepares learners to load components, align probes and run part programs on coordinate measuring machines so out-of-tolerance parts are identified before they move further through production. For RTOs delivering engineering production and quality programs, it fills a gap in CMM operation, and MEM12019 training materials give trainers an organised starting point.

Learners develop skills in completing pre-start checks, selecting fixtures and clamping devices, loading components, checking probe configuration, taking manual alignment hits, running and verifying part programs, interpreting results and leaving the CMM clean and safe.

Why MEM12019 Belongs in Your Scope:

  • Adds coordinate measuring machine operation to production and quality programs, supported by MEM12019 RTO learning materials on set-up, probing and result interpretation
  • Suits machine operators, inspectors and quality staff who check manufactured components on CMMs
  • Addresses workplace needs including fixture selection, probe alignment, part program verification, non-conformance reporting and contamination control

Why RTOs Choose TotalVET Training Resources:

  • Complete suite of learner, trainer and assessment resources developed around current training package requirements
  • Fully editable digital resources that can be contextualised and branded for your organisation
  • Unlimited student licence with no ongoing per-student fees

Equip trainers with our MEM12019 RTO training materials for CMM delivery rather than developing specialised inspection content in-house. Purchase RTO materials and provide MEM12019 training resources that can reflect your own machines and part programs.

Icon - Assessment Guides
Inclusions

What’s Inside Your MEM12019 RTO Materials:

Your MEM12019 training materials provide a prepared foundation for measuring components using coordinate measuring machines. Purchase RTO materials and start with MEM12019 learning materials ready for contextualisation.

MEM12019 Learning Materials

  • Learner Guide
    Learner-facing content in the MEM12019 training resources on CMM pre-start checks, fixtures, probe alignment and part program operation.
  • PowerPoint Presentation
    Presentation-ready material for introducing concepts, prompting discussion and reinforcing key learning points.
  • Class Activities Book (Assessor and Student)
    Activities that help learners interpret CMM results and identify out-of-tolerance features.
  • Self-study Guide
    Extra reading and revision material that reinforces learning away from the classroom or workshop.
  • Session Plan
    A delivery framework that helps trainers sequence content, activities and practical demonstrations.

MEM12019 Assessment Tools

  • Student Assessment Pack
    Practical tasks for loading components, aligning probes and measuring parts on a CMM.
  • Trainer Assessment Pack/Marking Guide
    Marking guidance and expected responses that give assessors clear reference points when reviewing submissions.
  • Mapping Information
    Documents how the assessment resources align with the unit’s elements, performance evidence and knowledge evidence.
  • Supporting Documents
    Additional templates and forms that support assessment administration and record keeping.

Check the latest unit requirements on training.gov.au before delivery. Your team should contextualise and validate these MEM12019 training materials for its learner cohort, delivery model and selected compliance environment. Use the supplied mapping as a starting point when reviewing your MEM12019 materials against the Standards for RTOs.

Icon - Learner Guides
About

MEM12019 Measure components using coordinate measuring machines covers operating coordinate measuring machines in a production environment, including basic set-up of components and manual alignment of probes. It applies to measuring and verifying manufactured parts against specifications.

The unit addresses five core areas:

  • Following SOPs and WHS requirements, using PPE and identifying job requirements from specifications, sketches and job sheets
  • Undertaking pre-start checks, checking safety equipment and selecting the correct fixture or clamping device
  • Loading and clamping components and fixtures in accordance with SOPs
  • Checking probe configuration and taking pre-measurement manual hits to determine probe alignment
  • Running and verifying part programs, interpreting results, reporting out-of-tolerance measurements and leaving the machine clean and safe
Icon - Observation Forms and Assessor Checklists
FAQs

Frequently Asked Questions

Do learners need access to a CMM to complete the MEM12019 training materials?

Yes. Performance evidence requires loading components, aligning probes and running part programs on at least two occasions, so access to a coordinate measuring machine in a production or simulated environment is needed.

Can trainers adapt the MEM12019 learning materials to our CMM software?

Yes. The editable files let your team add screenshots, part program procedures and fixture details for the machine learners will use.

Which related units are suggested alongside this unit?

Depending on the role, units such as MEM09002 Interpret technical drawing, MEM12023 Perform engineering measurements or MEM18001 Use hand tools may also be selected. The MEM12019 RTO training resources focus on CMM operation itself.

Are these MEM12019 resources guaranteed compliant learning resources?

No. They are developed with training package considerations in mind, but compliant learning resources does not mean a guarantee of compliance or audit outcomes.

Can we request a sample of these RTO resources?

Yes. A free sample lets your team check the presentation and structure before you purchase RTO materials.

Request Free Samples, More Info & Pricing

By submitting this form, you agree to the TotalVET Training Resources Privacy Policy.

Sale Banner

Discover What Our Clients Say About our Exceptional RTO Training Materials & Compliant Learning Resources

4.4
Based on 7 reviews
Colin J. profile picture
Colin J.
7 months ago
A pleasure to deal with John and the team, great resources and excellent service
Mark and the team were outstanding from start to finish. Highly recommend their services to those looking to purchase off the shelf training and assessment resources ahead of contextualisation.
Yalcin O. profile picture
Yalcin O.
2 years ago
Quality and compliant resources, a very helpful support staff and Mark Lara for a account manager, WOW, 5 stars is not enough. Thank you
Samantha B. profile picture
Samantha B.
2 years ago
John's customer services was exceptional. Nothing was a bother, and he was prompt as well. Appreciated :)
Shannon S profile picture
Shannon S
3 years ago
Purchased several BSB, ICT and FNS qualifications and am quite happy with the quality of the RTO materials from TotalVET Training Resources. Found the simulated business sites partially helpful, and the customer service quick and efficient.
Chelsea B. profile picture
Chelsea B.
3 years ago
ross J. profile picture
ross J.
4 years ago
Purchased excellent resources from TotalVET and look forward to using them into the future for all my delivery and assessing. Thanks TotalVET. Purchased 13 subjects in 2021 and have been using these in class and in the workplace to trainees. they are easy to follow and have all the required documentation required to be assessment competently.