LinkedIn Insight Tag

MEM26001 Lay up composites using open moulding techniques RTO Materials

ON SALE
Current
Current
Coming Soon
Coming Soon
Total student enrolments:

10

(latest NCVER data)

Open moulding remains a core method for producing boats, tanks and other composite parts, and the result depends on careful mould preparation, resin control and laminating technique. MEM26001 Lay up composites using open moulding techniques covers that hands-on fabrication, and RTOs offering composites trade qualifications can deliver it with MEM26001 training materials that cover gel coat, reinforcement and curing.

Learners develop skills in selecting open moulding techniques, preparing moulds and release systems, calculating and mixing resin, applying gel coat, resin and reinforcement by roller, brush or chopper gun, curing and demoulding products and maintaining equipment.

Why MEM26001 Belongs in Your Scope:

  • Creates a foundation fabrication unit for composites programs, with MEM26001 training resources that sit alongside the vacuum and pressure closed moulding units
  • Suits composite apprentices and production workers laying up parts in marine, transport or industrial manufacturing settings
  • Addresses workplace needs including mould preparation, resin calculation, laminating technique, air entrapment removal, cure monitoring and equipment maintenance

Why RTOs Choose TotalVET Training Resources:

  • A complete suite of resources covering learner, trainer and assessment needs and built around current training package requirements
  • Fully editable resources that support permitted contextualisation and organisational branding
  • An unlimited student licence without ongoing per-student resource fees

Get our MEM26001 RTO training materials and skip writing open moulding resources from scratch. Purchase RTO materials and use MEM26001 learning materials that follow the workshop sequence from mould preparation to clean-up.

Icon - Assessment Guides
Inclusions

What’s Inside Your MEM26001 RTO Materials:

These MEM26001 RTO training materials provide a prepared foundation for laying up composites with open moulding techniques. Purchase RTO materials to save development time and start with MEM26001 training materials ready for your workshop procedures.

MEM26001 Learning Materials

  • Learner Guide
    Content within the MEM26001 learning materials covering release agents, gel coat and resin types, reinforcement, lay-up techniques, curing variables and hazardous environment controls.
  • PowerPoint Presentation
    Trainer-ready slides that break open moulding materials and lay-up techniques into manageable stages for group delivery.
  • Class Activities Book (Assessor and Student)
    Student and assessor versions of practical activities that help learners practise resin calculations and laminating checks before assessment.
  • Self-study Guide
    Supplementary material for independent revision of open moulding materials and lay-up techniques.
  • Session Plan
    A planning document that sets out how sessions can be organised across the unit.

MEM26001 Assessment Tools

  • Student Assessment Pack
    Learner-facing tasks and evidence requirements for laying up composite products on at least two occasions.
  • Trainer Assessment Pack/Marking Guide
    Observation guidance and benchmark responses for judging lay-up quality, resin distribution and equipment care.
  • Mapping Information
    Traces unit requirements to the relevant assessment items so coverage can be reviewed.
  • Supporting Documents
    Extra documents that assist learners and assessors when completing lay-up and finishing tasks.

Check the latest unit requirements on training.gov.au before delivery. Your team should contextualise and validate these MEM26001 training materials for its learner cohort, delivery model and selected compliance environment. Use the supplied mapping as a starting point when reviewing your MEM26001 materials against the Standards for RTOs.

Icon - Learner Guides
About

MEM26001 Lay up composites using open moulding techniques covers fabricating composites using open moulding techniques. It is one of three basic composite fabrication units, alongside vacuum and pressure closed moulding, that together prepare a composite tradesperson to complete basic fabrication.

The unit addresses five core areas:

  • Following SOPs, WHS requirements and PPE use and selecting an open moulding technique suited to the product requirements
  • Selecting and assembling equipment and preparing reinforcement and resin systems with minimised waste
  • Identifying and controlling hazards and applying gel coat, resin and reinforcement to achieve the required resin distribution
  • Curing and removing product from the mould, resolving typical problems and verifying product requirements
  • Cleaning, maintaining, inspecting and storing equipment, disposing of waste and completing logs and reports
Icon - Observation Forms and Assessor Checklists
FAQs

Frequently Asked Questions

What equipment do learners need when using the MEM26001 training resources?

Learners apply gel coat and resin with rollers, brushes or a chopper gun and complete minor maintenance on chopper guns or pump systems, so a suitably equipped composites workshop is needed.

Do the MEM26001 training materials address humidity and temperature effects on curing?

Yes. Content covers production environment variables such as humidity, temperature, UV light and contamination, along with post-cure requirements.

Can we add our own SOPs and batch sheets to the MEM26001 learning materials?

Yes. The editable files let trainers insert workplace procedures, batch sheets and product specifications used by local manufacturers.

Do these RTO resources receive updates?

Yes. Lifetime updates are available under the applicable product terms, so qualifying publisher-issued updates can be accessed without buying the product again.

Can we rely on the MEM26001 materials as a compliance guarantee?

No. They are developed as compliant learning resources with training package requirements in mind, but no guarantee of compliance or audit outcome is given, and validation remains your organisation’s responsibility.

Request Free Samples, More Info & Pricing

By submitting this form, you agree to the TotalVET Training Resources Privacy Policy.

Sale Banner

Discover What Our Clients Say About our Exceptional RTO Training Materials & Compliant Learning Resources

4.4
Based on 7 reviews
Colin J. profile picture
Colin J.
7 months ago
A pleasure to deal with John and the team, great resources and excellent service
Mark and the team were outstanding from start to finish. Highly recommend their services to those looking to purchase off the shelf training and assessment resources ahead of contextualisation.
Yalcin O. profile picture
Yalcin O.
2 years ago
Quality and compliant resources, a very helpful support staff and Mark Lara for a account manager, WOW, 5 stars is not enough. Thank you
Samantha B. profile picture
Samantha B.
2 years ago
John's customer services was exceptional. Nothing was a bother, and he was prompt as well. Appreciated :)
Shannon S profile picture
Shannon S
3 years ago
Purchased several BSB, ICT and FNS qualifications and am quite happy with the quality of the RTO materials from TotalVET Training Resources. Found the simulated business sites partially helpful, and the customer service quick and efficient.
Chelsea B. profile picture
Chelsea B.
3 years ago
ross J. profile picture
ross J.
4 years ago
Purchased excellent resources from TotalVET and look forward to using them into the future for all my delivery and assessing. Thanks TotalVET. Purchased 13 subjects in 2021 and have been using these in class and in the workplace to trainees. they are easy to follow and have all the required documentation required to be assessment competently.