LinkedIn Insight Tag

UEEEL0014 Isolate, test and troubleshoot low voltage electrical circuits RTO Training Resources

ON SALE
Current
Current
Now Available
Now Available
Total student enrolments:

14,515

(latest NCVER data)

Electrical contractors rely on workers who have completed UEEEL0014 Isolate, test and troubleshoot low voltage electrical circuits* to isolate circuits from every energy source, prove de-energisation and carry out the mandatory tests that confirm an installation is safe. Our UEEEL0014 training materials help RTOs deliver this safety-critical capability within electrotechnology apprenticeship programs.

Learners develop skills in preparing SWMS or JSA documents, identifying points of isolation, applying lock-out and tag-out procedures, discharging stored energy, testing earth continuity, insulation resistance, polarity and RCD operation, verifying fault-loop impedance and troubleshooting circuit faults.

Why UEEEL0014 Belongs in Your Scope:

  • Extends electrotechnology programs with UEEEL0014 training resources focused on safe isolation, compliance testing and methodical fault finding
  • Suits apprentices and electrical workers who isolate, test and repair low voltage circuits as part of installation and service work
  • Addresses workplace needs including lock-out and permit systems, proving de-energisation, mandatory testing sequences, alternative supply checks, non-compliance reporting and repairs

Why RTOs Choose TotalVET Training Resources:

  • A complete suite of resources covering learner, trainer and assessment needs and built around current training package requirements
  • Fully editable resources that support permitted contextualisation and organisational branding
  • An unlimited student licence without ongoing per-student resource fees

Skip building isolation and testing resources from scratch and start with our UEEEL0014 RTO training materials. Purchase RTO materials and give trainers UEEEL0014 learning materials that set out each testing stage clearly.

Icon - Assessment Guides
Inclusions

What’s Inside Your UEEEL0014 RTO Training Materials:

This package of UEEEL0014 learning materials provides a prepared foundation for isolating, testing and troubleshooting low voltage circuits. Purchase RTO materials and draw on the UEEEL0014 RTO training materials for consistent delivery across cohorts.

UEEEL0014 Learning Materials

  • Learner Guide
    Covers safe isolation, mandatory test sequences, verification requirements and fault-finding methods as the key learner reference in the UEEEL0014 training resources.
  • PowerPoint Presentation
    Presentation slides that help trainers explain isolation procedures and test results clearly.
  • Class Activities Book (Assessor and Student)
    Assessor and student activities for practising test sequences, interpreting readings and diagnosing faults.
  • Self-study Guide
    Additional material for revising testing terminology, regulatory requirements and safety procedures.
  • Session Plan
    A practical trainer guide for planning sessions around isolation and testing practice.

UEEEL0014 Assessment Tools

  • Student Assessment Pack
    Learner-facing tasks and evidence requirements for isolation, compliance testing and troubleshooting.
  • Trainer Assessment Pack/Marking Guide
    Benchmark answers and observation guidance for judging test procedures, readings and repairs.
  • Mapping Information
    Shows how the assessment tasks address the unit requirements.
  • Supporting Documents
    Supporting documents such as observation checklists and test record templates.

Check the latest unit requirements on training.gov.au before delivery. Your team should contextualise and validate these UEEEL0014 training materials for its learner cohort, delivery model and selected compliance environment. Use the supplied mapping as a starting point when reviewing your UEEEL0014 materials against the Standards for RTOs.

Icon - Learner Guides
About

UEEEL0014 Isolate, test and troubleshoot low voltage electrical circuits* covers isolating, testing and troubleshooting electrical circuits operating at low voltage. It applies to electrical workers who evaluate circuits, apply systematic fault-finding procedures and complete repairs and documentation.

The unit addresses five core areas:

  • Determining the scope of work, applying WHS/OHS requirements and identifying electrical hazards and relevant standards
  • Identifying energy sources and isolation points, securing isolation with locks, tags or permits and proving de-energisation
  • Conducting visual inspection and mandatory tests, including earth continuity, insulation resistance, polarity, fault-loop impedance and RCD operation
  • Documenting test results and identifying and reporting non-compliances
  • Locating, identifying and repairing faults methodically using measured and calculated circuit values
Icon - Observation Forms and Assessor Checklists
FAQs

Frequently Asked Questions

Do the UEEEL0014 training materials include practice with lock-out and tag-out procedures?

Yes. The learning content and activities walk learners through isolation points, securing devices, danger tags and proving de-energisation before they are assessed on these tasks.

How are the UEEEL0014 learning materials structured for mandatory testing?

They follow the sequence of tests learners need to perform and explain what each result indicates. Trainers can add their own test instrument instructions and result sheets.

Can we align the UEEEL0014 assessment tasks with our workshop fault rigs?

Yes. The editable files let your team adapt fault scenarios and test records to the training boards and equipment available, provided the unit requirements are still covered.

Are these compliant learning resources?

They are developed as compliant learning resources, but no resource can guarantee audit results. Your organisation should validate the materials before delivery.

Can we preview these RTO resources before buying?

Yes. Free samples let your team check the depth and presentation of the materials before you purchase RTO materials.

Discover What Our Clients Say About our Exceptional RTO Training Materials & Compliant Learning Resources

4.4
Based on 7 reviews
Colin J. profile picture
Colin J.
8 months ago
A pleasure to deal with John and the team, great resources and excellent service
Mark and the team were outstanding from start to finish. Highly recommend their services to those looking to purchase off the shelf training and assessment resources ahead of contextualisation.
Yalcin O. profile picture
Yalcin O.
2 years ago
Quality and compliant resources, a very helpful support staff and Mark Lara for a account manager, WOW, 5 stars is not enough. Thank you
Samantha B. profile picture
Samantha B.
2 years ago
John's customer services was exceptional. Nothing was a bother, and he was prompt as well. Appreciated :)
Shannon S profile picture
Shannon S
3 years ago
Purchased several BSB, ICT and FNS qualifications and am quite happy with the quality of the RTO materials from TotalVET Training Resources. Found the simulated business sites partially helpful, and the customer service quick and efficient.
Chelsea B. profile picture
Chelsea B.
3 years ago
ross J. profile picture
ross J.
4 years ago
Purchased excellent resources from TotalVET and look forward to using them into the future for all my delivery and assessing. Thanks TotalVET. Purchased 13 subjects in 2021 and have been using these in class and in the workplace to trainees. they are easy to follow and have all the required documentation required to be assessment competently.