LinkedIn Insight Tag

MEM12007 Mark off/out structural fabrications and shapes RTO Training Resources

ON SALE
Current
Current
Now Available
Now Available
Total student enrolments:

5,610

(latest NCVER data)

Accurate set-out, delivered through MEM12007 Mark off/out structural fabrications and shapes, helps fabrication tradespeople transfer dimensions, datums and allowances to material so parts fit together with minimal waste. RTOs offering engineering fabrication apprenticeships can use it to build trade-level marking out skills, supported by MEM12007 learning materials.

Learners develop skills in interpreting fabrication drawings and specifications, marking out to tolerances, establishing datum points, producing and storing templates, developing patterns, calculating fabrication and assembly allowances and estimating material quantities.

Why MEM12007 Belongs in Your Scope:

  • Strengthens fabrication apprenticeship programs with MEM12007 training materials focused on trade-level marking off/out in steel fabrication, boilermaking and sheet metal work
  • Suits fabrication apprentices and tradespeople who produce templates and patterns and set out structural components to drawings
  • Addresses workplace needs including datum points, template material selection, pattern development, shrinkage and thickness allowances, code and symbol interpretation and minimising material wastage

Why RTOs Choose TotalVET Training Resources:

  • Complete suite of learner, trainer and assessment resources developed around current training package requirements
  • Fully editable digital resources that can be contextualised and branded for your organisation
  • Unlimited student licence with no ongoing per-student fees

Give your team our MEM12007 RTO training materials instead of creating pattern development exercises internally. Purchase RTO materials and use the MEM12007 training resources to structure workshop practice and assessment.

Icon - Assessment Guides
Inclusions

What’s Inside Your MEM12007 RTO Materials:

This package of MEM12007 RTO training materials provides a prepared foundation for marking off/out structural fabrications and shapes. Purchase RTO materials and work from MEM12007 learning materials that link drawing interpretation with practical set-out.

MEM12007 Learning Materials

  • Learner Guide
    Learner content in the MEM12007 training materials covering marking out tools, datums, template materials, development methods and fabrication allowances.
  • PowerPoint Presentation
    Presentation slides that reinforce key points about set-out methods, datums and pattern development.
  • Session Plan
    A planning tool that links each session to the relevant learning content and activities.
  • Classroom Activities
    Layout and calculation activities that let learners practise allowances and template work before marking out material.
  • Self-Study Guide
    Extra reading and review tasks for learners working through fabrication allowances, codes and symbols independently.

MEM12007 Assessment Tools

  • Assessment Pack (Student)
    Learner-facing set-out tasks, fabrication drawings and evidence requirements for marking off/out and template production.
  • Trainer Assessment Pack (Marking Guide)
    Benchmark guidance that helps assessors check set-out accuracy, templates, allowances and material estimates.
  • Mapping for Each Unit of Competency
    Shows where the unit requirements are addressed across the supplied assessment tasks.
  • Assessment Record Tools
    Templates for recording evidence, assessment outcomes and competency decisions.

Check the latest unit requirements on training.gov.au before delivery. Your team should contextualise and validate these MEM12007 training materials for its learner cohort, delivery model and selected compliance environment. Use the supplied mapping as a starting point when reviewing your MEM12007 materials against the Standards for RTOs.

Icon - Learner Guides
About

MEM12007 Mark off/out structural fabrications and shapes covers marking off/out general fabrications and shapes to specified measurements, tolerances and shapes, producing templates and patterns as required. It applies to engineering fabrication apprenticeships and trade-level work in steel fabrication, boilermaking and sheet metal work, including basic lofting in marine settings.

The unit addresses five core areas:

  • Identifying job requirements from specifications and drawings and following SOPs, WHS and PPE requirements
  • Transferring dimensions from detail drawings to the work surface using correct calculations and establishing datum points
  • Choosing template or pattern material, producing templates to specifications and labelling and storing them
  • Developing patterns, determining fabrication and assembly allowances and checking the accuracy of transferred measurements
  • Interpreting relevant codes, standards and symbols and estimating material quantities while minimising wastage
Icon - Observation Forms and Assessor Checklists
FAQs

Frequently Asked Questions

Can the MEM12007 training resources be used in marine lofting contexts?

Yes, with contextualisation. The unit includes basic lofting and set-out for marine vessels, so your team can add hull, stem and transom examples where learners work in a marine setting.

What workshop resources are needed for the MEM12007 assessment tasks?

Learners need marking out tools, template materials and fabrication drawings to complete set-out tasks on at least two occasions. The tasks are developed as compliant learning resources, but your team should confirm workshop access before enrolment.

How do the MEM12007 learning materials help with allowance calculations?

The Learner Guide and Classroom Activities walk learners through shrinkage, thickness and inside/outside allowances, giving them practice before they apply calculations in the workshop.

Do the MEM12007 training materials support consistent marking by assessors?

Yes. The marking guide provides benchmark responses and observation guidance for set-out accuracy, templates and pattern development.

Is there an ongoing fee for using these RTO resources?

No. The unlimited student licence lets the purchasing organisation use them with all enrolled learners without per-student fees, subject to the applicable licence conditions.

Request Free Samples, More Info & Pricing

By submitting this form, you agree to the TotalVET Training Resources Privacy Policy.

Sale Banner

Discover What Our Clients Say About our Exceptional RTO Training Materials & Compliant Learning Resources

4.4
Based on 7 reviews
Colin J. profile picture
Colin J.
7 months ago
A pleasure to deal with John and the team, great resources and excellent service
Mark and the team were outstanding from start to finish. Highly recommend their services to those looking to purchase off the shelf training and assessment resources ahead of contextualisation.
Yalcin O. profile picture
Yalcin O.
2 years ago
Quality and compliant resources, a very helpful support staff and Mark Lara for a account manager, WOW, 5 stars is not enough. Thank you
Samantha B. profile picture
Samantha B.
2 years ago
John's customer services was exceptional. Nothing was a bother, and he was prompt as well. Appreciated :)
Shannon S profile picture
Shannon S
3 years ago
Purchased several BSB, ICT and FNS qualifications and am quite happy with the quality of the RTO materials from TotalVET Training Resources. Found the simulated business sites partially helpful, and the customer service quick and efficient.
Chelsea B. profile picture
Chelsea B.
3 years ago
ross J. profile picture
ross J.
4 years ago
Purchased excellent resources from TotalVET and look forward to using them into the future for all my delivery and assessing. Thanks TotalVET. Purchased 13 subjects in 2021 and have been using these in class and in the workplace to trainees. they are easy to follow and have all the required documentation required to be assessment competently.